Polyvinyl Chloride Coated Faux Leather Fabric; Content Backing: 100% Polyester; Content Face: 100% Vinyl; Abrasion: 1,500,000 Double Rubs (Wyzenbeek); UV Resistance: Colorfastness to Light AATCC 16 - Grade 4, 1500 hours; After Treatment Finish: Stock finished with Endurepel Armour.; After Treatment Finish: Endurepel Armour - Stain and Soil Resistant, Anti-Bacterial; Anti-Static: ASTM D257: 10^12 OHMS per Square; Breaking Strength ASTM D751-06: Procedure A, CFFA 17-2013 - Weft 94 lbs x Warp 101 lbs; Cleaning Code W - Clean fabrics with water-based cleaning agents or water based foam.Bleach Cleanable Ratio 1:9 - Dilution ratios must be followed. Materials must be wiped with clean water after use to remove any cleaning residue and wiped dry with a clean cloth. Environmental Facts: Eco-Friendly, No intentionally add Lead, Heavy Metal Free, No intentionally added PFAS chemicals, Phthalate Free, No intentionally added PFC/ PFOA, California Proposition 65 compliant, Red List Free; Sustainable Manufacturing: ISO 14001 Certified
A coated fabrics’ ability to resist specific cleaners and disinfectants is an essential part of the products performance. All the coated fabrics in the Challenger line are tested to evaluate the impact of these cleaners on coated fabrics. Regular cleaning and maintenance are required for dirt, dust, and grime by cleaning the area with mild soap and water, then rinsing with fresh water and drying with a clean cloth. For best results treat all stains immediately. Use only recommended disinfectants as listed.